Tiling a bathroom in Mallorca costs between €45 and €75 per square metre of wall in 2026, including materials and labour, compared to a national average of €40-€60 per square metre. Labour alone costs between €25 and €40 per square metre, and removing the old tiles adds another €12-€35 per square metre. The calculation that almost no one gets right: a bathroom with 4 square metres of floor space has between 20 and 28 square metres of wall space, so the total budget comes out to between €900 and €2,100, not between €180 and €300.
How do you calculate the square metres of tiling in a bathroom?
The square metres of tiling refer to the wall area, not the floor area. The perimeters of each wall to be tiled are added together and multiplied by the height; this sum determines the price per square metre. Confusing floor area with tiled area multiplies the error fivefold.
The practical formula is this: bathroom perimeter × tiling height, less door and window openings. With a real example of a typical bathroom in Palma: If your bathroom is in the capital, we have a specific page for Bathroom renovations in Palma with the fixed price of labor.
- Bathroom of 2.0 × 2.2 m → 4.4 m² floor area.
- Perimeter: (2.0 + 2.2) × 2 = 8.4 linear m.
- Tiling at 2.20 m height: 8.4 × 2.20 = 18.5 m² of wall.
- Smaller doorway (approximately 1.7 m²): 16.8 m² net.
- At €60/m² including materials: 1.008 €.
If, instead of tiling up to 2.20 m, you tile all the way to the ceiling at 2.60 m, the same bathroom will increase to a net area of 20 m². That's four more metres of material and labour for a decision made in two seconds. It's worth keeping this in mind when comparing two quotes: if one quotes a much lower total price, the first thing to look at isn't the unit price, but rather the height at which each quote was taken.
How much does a tiler charge per square metre in Mallorca?
Tiling labour costs in Mallorca are projected to range between €25 and €40/m² in 2026, compared to the national average of €18-€35/m². The island's position at the higher end of the range is due to a simple supply and demand dynamic: residential renovation activity has remained strong, and skilled tradespeople are booked solid months in advance.
Within that range, what drives the price up is the tile size and the complexity of the layout. A 60x120 porcelain tile in a bathroom with many corners, niches, and junctions requires more skill and time than a 30x60 tile on straight walls, and the price reflects this. Mosaics and herringbone patterns are the most expensive formats to install.
Beware of a figure that's been circulating a lot: the €15-17/m² shown in national tables corresponds to tiling and grouting on a wall that's already plastered and in good condition. It's a real price, but it only applies to that specific scenario. In an existing bathroom, with old tiles that need to be removed and a substrate that needs to be repaired, that's not the figure that will end up on the bill.
How much does it cost to tile a bathroom depending on its size?
| Bathroom size | Wall to be tiled | Cost with material |
|---|---|---|
| Small, up to 4 m² | 16 – 22 m² | €720 – €1,650 |
| Medium, 5-8 m² | 22 – 34 m² | €990 – €2,550 |
| Large, over 8 m² | 34 – 45 m² | €1,530 – €3,375 |
| Shower tray only or bathtub | 5 – 8 m² | €225 – €600 |
These figures assume the existing surface is in good condition. If the existing tiles need to be removed and replastered, add between €12 and €35/m², which in a medium-sized bathroom amounts to an additional €260-€1,190. And if the wet area needs proper waterproofing—which it should always be—expect to pay between €18 and €30/m² on the treated surface.
Which tiling material suits which budget?
| Material | Material price | When does it make sense? |
|---|---|---|
| Ceramic tile | 8 – 25 €/m² | Tight budget, rented bathroom, areas without direct splashing |
| Porcelain stoneware | 13 – 40 €/m² | Balanced option: hardness, low absorption, large formats |
| Hydraulic tile | 50 – 60 €/m² | Traditional house, seeking character; requires sealing and maintenance |
| Marble or natural stone | 50 – 80 €/m² | High-quality finish; requires periodic stain-resistant treatment |
| Microcement | from €70/m² | Seamless continuity; highly dependent on the hand applying it |
If the bathroom is used frequently, porcelain is the most sensible choice: it absorbs very little water, withstands the test of time, and is now available in finishes that mimic stone or cement without the maintenance requirements of real stone. Natural stone is beautiful but requires care; microcement, when applied by someone inexperienced, is the part that most often needs to be redone. We discuss this in more detail in microcement in bathrooms and kitchens and in What are the best materials for renovating a bathroom?.
What makes tiling a bathroom more expensive?
Six factors explain almost the whole difference between a quote of €900 and one of €2,100 for the same bathroom:
- Remove the old tiling and clean the substrate when the plaster is hollow.
- Large formats or complex cuts, which require more skill and more time.
- Tiling the ceiling instead of halfway up.
- Waterproofing of the wet area, when done correctly.
- Special pieces: niches, steps, finials and exposed edges.
- Difficult access: apartments without elevators and streets in the old town of Palma with no possibility of parking.
Point 6 is always underestimated. Carrying 25 m² of porcelain tiles up and down the rubble by hand up a staircase in a building without an elevator in Santa Catalina takes half a day for two people, and someone has to pay for it.
How do you read a tiling estimate without getting any surprises?
A tiling estimate is read by checking four things: the square metres of wall that have been measured, whether the removal of the old tiling is included or excluded, whether waterproofing appears as a separate item, and whether the material is included or separate.
With that, a real comparison can be made. And there are three signs worth taking as warnings:
- A total price without metres or unit price. It prevents comparison and makes it easier for the figure to grow later.
- Waterproofing is not present. Either it's not done, or it's done without charging for it, and neither option sounds good. It's a health requirement included in the basic document DB-HS of the Technical Building Code, not an optional extra.
- «"Unforeseen events will be assessed separately," without further explanation. An unforeseen problem can happen, but the quote should state the unit price at which each likely case would be valued.
It's the same logic we apply to contract for a renovationwhat is not written is not agreed upon.
Is it cheaper to tile the bathroom or to completely renovate it?
Tiling only costs between 25% and 40% of the cost of a complete bathroom, so it's immediately cheaper. But it's only a cost-effective option if the plumbing, drainage, and fixtures are in good condition and the only concern is the aesthetics.
As soon as the waste has to be moved, the bath swapped for a shower or the pipework renewed, tiling first is money lost: it will all have to be chipped out again. A complete bathroom is €3,415 + VAT of labour at our fixed price, and swapping the bath for a shower tray €1,375 + VAT. Compared with the €900-2,100 of tiling and touching nothing else, the difference usually justifies doing it in one go. The step-by-step breakdown is in Complete bathroom renovation: steps, cost and tips.
Frequently asked questions about the price of tiling a bathroom
How much does it cost to tile a 4 m² bathroom in Mallorca?
A bathroom with a 4 m² footprint requires between 16 and 22 m² of wall space, so tiling it costs between €720 and €1,650 in 2026, including materials and labour. If the old tiles need to be removed and the walls replastered, add between €200 and €770. The final price depends mainly on the chosen material: the difference between ceramic tiles at €10/m² and porcelain tiles at €40/m² can be several hundred euros for the same bathroom.
How much does it cost just for labour to tile a bathroom?
Between €25 and €40/m² of wall space in Mallorca, which in a medium-sized bathroom with 25 m² of tiling translates to €625-€1,000 in labour only, excluding materials. If the price includes removing the old tiles and re-plastering, you should budget an additional €12-€35/m² for this service, which is separate from the installation cost.
Is it more expensive to tile with large or small tiles?
Installing large-format tiles and mosaics is more expensive, for different reasons. Large-format tiles require a perfectly flat surface and skilled installers, as they are unforgiving of uneven surfaces; mosaics and herringbone patterns are expensive due to the time required for individual installation. Medium-sized tiles, such as 30x60 cm, are the most economical to install.
Is it possible to tile a bathroom without removing the old tiles?
Yes, provided the existing tiling is firm, flat, and well-adhered, and only 2-3 cm are lost per wall. You can check this by tapping the surface: where it sounds hollow, it won't adhere. If there is more than 10-15 cm of hollow surface or the bathroom has had dampness, you'll need to chip away the tiles. We explain this in detail on our website Bathroom tiling in Palma de Mallorca.
Do you want an exact number for your bathroom?
The ranges in this article are for guidance only, but the actual price of tiling your bathroom depends on three things that can only be determined by measuring: the actual wall surface area, the condition of the substrate, and the material you choose. Let's take a look without obligation and provide you with a quote broken down into separate items. We are a renovation company in Palma de Mallorca with three generations in the business, and if what you need is a complete bathroom, you'll find it detailed in our Bathroom renovation service in Mallorca.
